Hiwheel H3 Hoverboard

 

Hiwheel H3 Hoverboard

Main features:

-36V 4400mAh battery, greater security

-Specialized German high-tech 2 x 350W motor, with dynamical system and stable internal construction, the hoverboard gives you windless rideability

-With aluminum alloy hub and high-quality rubber wheels, ensuring the weight capacity around 100kg

-Specified automobile waterproof paint, artistic and slap-up, it won't influence your use even on rainy days

-Cool LED light makes it safer to drive in low visibility conditions

-Portable, compact structure design, it weights only 10.3kg

- Charging input voltage: AC 110 - 220V 50 / 60Hz

- Charging output voltage: 42V

- Safe speed: 12km/h

How to calibrate your hoverboard:

1. Before calibrating the hoverboard, please be sure you will follow the steps below carefully

2. Make sure the balance scooter is powered off

3. Put the scooter on a flat and smooth ground, ensuring both pedals are flat and parallel to the ground (This is very important)

4. Press and hold the power button until indicators on both sides are started to flash

5. After indicators flash for 8 times, turn off the scooter

6. Turn on the scooter after several seconds, then you can ride it

7. If the scooter does not reset, please try the above steps again after 10 minutes

Note: Please do not press the power button frequently, the circuit board may be damaged by doing this

Product Notes:
1. You must calibrate the balancing scooter before driving. The way to adjust the scooter has been shown in our main features.
2. Don't use this scooter at low battery situation. If there is low battery alarm please stop and fully charge the scooter to avoid the hurt caused by sudden stop.
3. Please fully charge the scooter before long time collection and check the electric quantity once after every 4 weeks.

On the fence about this Hiwheel H3 Hoverboard? Don't be. Let our satisfaction guarantee address your concerns.

Click Here To Buy